Increase Internal Memory Of LG Optimus L3 E405 - Link2SD

How To Increase the Internal Memory Of LG L3 E405 Using Link2SD

LG L3 E405 is a budget level Dual Sim android phone working on android 2.3.6. Its fan base was smaller than its brother the E400.

Its main features are;

• Android v2.3 (Gingerbred) OS
• 3.2 MP Primary Camera
• 3.2-inch TFT LCD Capacitive Touchscreen
• 800 MHz Processor
• FM Radio
• Wi-Fi Enabled
• Expandable Storage Capacity of 32 GB

Downloads:

Link2SD Apk- link Link2SD Playstore - link Mini tool Partition Wizard -link

Let's Begin:

• Download MiniTool Partition Wizard From Internet

• Install it in your PC and run it.

• Now unmount your SD card and using any card reader connect it to your PC.
  You can view your SD card from Minitool partition ( try to reload if not present)

 

• Next Right Click on your SD card and select "Delete" from the menu. Keep in mind that this will delete all your Data present on your SD card. We have already warned you to backup important information before doing these steps.

•  Now right click on SD card and select "Create" . Create a FAT (not fat32) PRIMARY partition and choose the smallest size possible.

• Then create a EXT2 PRIMARY partition of 1 GB (not bigger) which will be used with Link2SD.

• Create a FAT32 partition for the remaining space left on the SD card, by the same way you created EXT2.

• Click the “Apply” button on the top left corner and wait for it to finish the process. Done.

• Put back your SD card to your phone and switch it on.

• Open Link2sd. You will be prompted to choose between ext2, ext3, ext4 and FAT32. Select ext2. (ext4 is also working in my case, try if working for u)

• It will say mount script created. Reboot your phone now.

• Open link2sd and if the message doesn’t show up, you succeded.

• Go to Link2sd>Settings>check the autolink (to automatically move apps upon installation) (Optional).

 

• If you already have some apps, select “move to phone” then after moving select “Create Link” (be sure to check the three files: app, dalvic-cache and library files).

There you go, you have successfully Increased your internal memory by linking a part of your SD card using LinkSD.

Read full post »

Increase Internal Memory Of Samsung Galaxy Ace GT-S5830-Link2SD

How To Increase Internal Memory Of Samsung Galaxy Ace GT-S5830

Samsung Galaxy Ace is a good Budget android phone. It has only a meager 158MB internal memory, which will surely show Low Internal memory warning after installing a dozen ore more hungry apps. 

So in this  article i will tell you how to increase effective system memory using Link2SD.

Warning:

• We aren't responsilble for any damages occures to your phone. Do at your own risk
• Rooting Void Warranty. You can get it back by unrooting later

 

Before We Begin:

• You device must be rooted-Root Ace S5830
• Download Minitool partition Wizard
• Require A Good SD card with atleast 2 GB space.[4GB+ recommended ( Class 4 or higher)]
• Download Lin2sd

Lets Begin:

• Download and install MiniTool partition Wizard.

• Mount your SD card to PC, and run Minitool. Before doing Make sure you back up all necessary data as it will be deleted.

• From Minitool wizard, search for your SD card. Now Right click on Card and Select " Delete". 

• After the partitions are deleted, Again Right click on SD card and select"
  Create New. Create a “FAT32″ partition. Please note that this will be the part of SD card that stores all media files and other things.  Select as " Primary " for this partition. Keep in mind that this partition should be bigger than The secondary one we are going to create for linking apps.
  
  

• Now create a second partition of type- ext2/ext3/ext4. ( Almost all the roms and kernels supports ext2, so it will be suitable to use it for partition. Those with kernel supports for higher options can use them.) Note that this secondary partition is where your apps will go. 512MB-2GB is recommended. Its your choice.

• Click on the Apply button seen on top left corner of Minitool and continue.

• After partitioning put your SD card back in ace and switch it on. After powering on, install link2sd from playstore.

• When opening it , it will ask you to choose the second partition. From the list of partition choose ext2 ( or which ever you chose) 

• On choosing the partition, it will say " Mount script created. Reboot your phone now". reboot phone and start link2sd. If it doesn't ask for rebooting again, then you are successful. 

• now go to settings on Link2sd and select " Autolink". It will automatically install move apps to second partition.

• To move apps to phone, just select "move to phone" option and make sure you tick - app, dalvik cache and library.

Now you have increased your internal memory and install as many apps as you like on your Galaxy Ace. 

Feel Free to comment...

Read full post »

Increase Internal Memory Of Samsung Galaxy Y GT S5360

How To Increase Internal Memory Of Samsung Galaxy Y GT S5360

***Delete Bloatwares, Link Apps to SD, Increase Internal Memory***

Samsung galaxy y is a highly popular entry level android phone. The device packs fair quality stuffs. Then again, you can’t wish for HTC quality at this price.

The most annoying part of galaxy y is poor ram and low internal memory.

In this article we will show you how to increase internal memory of Galaxy Y GT S5360.

Warning:

• Rooting voids the device warranty. Do at your own risk
• These methods are given by xda experts
• Always make a backup of all important data.
• These methods are highly device specific. Please don't try this for other handsets.

 ( Tested ROMs: Galaxy Y  Stock, ChobitsDigitalis Legacy 1.6 and 1.8, may work with almost all roms with Link2sd Support)

Lets Begin: 

This methods requires your phone to be rooted first.

How to root samsung galaxy y gt s5630

Step 1: Partition Your Memory Card Into two.

• Download and Install MiniTool Partition, tool

• Partition Your SD card into two sections

Partition 1:
Label: Android-SD
File System: FAT32
Partition Size(in MB): 1536 MB (1.5GB for 2GB SD Cards) or 836MB (for 1GB SD Cards)
( for Cards above 2GB, deduct 1 GB for the second partition)

Partition 2:
Label: Android-EXT(EXT Number): Ex. Android-EXT2/EXT3 or EXT4
File System: EXT3 (preferable file system) 

Ext3 is tested and working fine on stock. So it is advisable.

"For EXT partition it is advisable to keep the size limited to 1 GB for all SD cards above 4GB."

• Install link2sd from playstore

• Open Link2sd. It will ask the Second partition of your SD card. Select the second partition that you have made.

• Now it will ask you you to restart. You can do it now or its better to check the current memory info from Menu--> Storage Info.

• Now Restart.  

• Open Link2SD and filter Applist to show only User Apps by tapping on the funnel icon and then select User.

Auto link all applications installed: select auto link from settings tab and make sure you have ticked all three links, dalvik,library,files,etc.

Move An Application To Second Partition :

•  Now in order to move an app to sd card, Select an application--> tick the following

Link application file (the .apk file itself)
Link dalvik-cache file
Link library file (if an app have lib files)

Uninstall Bloatwares:

• In order to uninstall bloatwares, Filter the applist to show only the system apps.
• Tap on the application and press Uninstall. It will give you a warning. Never mind, just continue.

There you go! You have successfully incresed the Internal Memory of your Galaxy Y GT S5360

Read full post »

Increase Internal Memory And RAM Of Samsung Galaxy Y Duos GT-S6102

How To Increase Internal Memory And RAM Of Samsung Galaxy Young Duos GT-S6102

Samsung Galaxy Y Duos is a great entry level android phone equipped with some pretty ok features.

In this Article I will show you guys how to increase the internal memory and RAM of your GT s6102.

Warning:

1. Rooting Voids Warranty
2. The methods given here are by experts
3. Try them at your own Risk.
4. Always make backup of any files required before proceeding further.

Downloads:

iDuos Kernel 1.3.1

CWM GT S6102 

Let’s Begin:

(Important –Swap and related A2SDGUI and Swapper are for RAM increasing process. For just increasing Internal memory, no need for swapper)

Step 1 : Partitioning Your SD Card For Link2SD

1. First Download Magic Partition Tool , which available for free
2. Make sure you use a Class 4 or higher SD card for this procedure.
3. Next, using Magic tool partition your SD card into two- FAT32, EXT2.( use three Partitions for Using Swapper for increasing RAM-Third partition is swap.)

Step 2: Install Custom Kernel

Custom kernel is for init.d support.

1. Download CWM and iDuos1.3.1 zip file and put in your sd card.
2. Now boot into stock recovery ( POWER+VOL UP+HOME)
3. Now Select “ Apply update from SD card”
4. First select the CWM zip file
5. Select “ Install zip from SD card”
6. Choose zip from SD card.
7. Now select the iDuos kernel zip file.
8. Next , continue with the installation.
9. After, press Back Key,, “reboot system now”

After finishing the installation and rebooting, check the kernel status on “About Phone” section from settings ..

Step 3: Root your Galaxy Y Duos GT S6102

The procedure for rooting Galaxy Y Duos has been posted earlier. Try this link to Root your device.-- How To Root GTS6102

Step 4: Install Link2SD on Your device.

1. Install Link2SD via Google play.
2. After installing link2sd go to Settings:--Applications:--Developments:--Now tick , “USB Debugging” and “ Allow Mock Locations”.
3. Run Link2sd.
4. Now it will ak you to select a file system for second partition. Choose” ext2”.
5. It will ask you to restart the device. Press “ OK”
6. After restarting , from link2sd choose “Settings”
7. Tick the “ Auto link” and Auto link notification”
8. Now set Install location as “ External”
9. Power Off.
10. Turn on the device and open link2sd to verify whether everything went okay.
11. From “Storage info” you can easily verify it.

Note: For SD cards Greater than 4 GB , use 1 GB+ for Second Partition

Step 4 : Install A2SDGUI-Darktremor A2SD GUI

1. Download A2SDGUI from Google Play
2. Install it
3. Run A2SDGUI

“If A2SDGUI can’t start; Download--dtapps2sd.zip

1. Reboot your device
2. Boot into stock recovery
3. Select “apply update from SD card”
4. Choose CWM zip :--Install zip from SD card.:--Choose zip from SD card:--dtapps2sd.zip:--Yes-Install:--Reboot System

4. Open A2SDGUI
5. From Apps2SD section and verify whether everything is activated or is on.
6. Be Extremely Careful or it will become a mess. Believe me.-“ Tick only “ Dalvik Cache on Internal memory”
7. Don’t tick anything else.
8. Check System info for Current RAM, Internal memory, SD card memory, etc.

Step 5 : Increases your RAM

1. Download Swapper for Root from playstore.
2. Install swapper
3. Run Swapper Configuration -->Tick Active swap on boot--> Swap file position: SD card FAT Partition-->Swap fle size: 200-->Save
4. Wait till it finishes configuring.
5. Now run A2SDGUI-->System info
6. Check whether RAM has increased.

There You Go! You have successfully increased your Galaxy Y Duos’s internal memory and RAM.

Read full post »

How To Increase Memory On LG L3 E400 Using Link2SD

Increase System Memory Of Your LG E400-Using Link2SD

 

Why You Should Do This?

Lg Optimus L3 E400 is a great entry level smartphone. It has a larger fan base. It possess a 832MHz CPU, Adreno 200 GPU for quality gaming and has 384 MB RAM. It has 1 GB internal SD and Supports External SD. But the major problem is that it possess about close to 200 MB system memory which is actually the available space for installing apps. Which is a great bummer!

I mean, just look at the specs, every other aspects of this phone will make it a great choice for an entry level android phone.Memory is an issue for those people who really like to have the liberty of installing many apps including gamers. Here is a way to increase your system memory using Link2SD. I have tried this method earlier with HTC explorer a310e and was working like a charm. Now with certain modifications i was able to make it work out on LG L3 E400.

 

Warning: 

 

• This method requires your phone to be rooted ; Check for rooting: Root LG L3 E400
• You must have atleast 60% of your battery left before doing these steps
• You must backup all your important data as you are about to create partitions and stuffs on your SD card.
• You must have ClockworkMod installed on your L3 ; Check- Install CWM On LG L3
• Enable " USB Debugging" and " Allow Mock Locations" On Development Settings of your device.

Instructions-Must Read

 

 

 

Let's Begin:

 

Part A

• First enter recovery menu after rebooting( Press Vol Down+Home+Power Button)

 

• From recovery mode, select " Wipe Data/Factory Reset" after that, select "Wipe Cache Partition" to wipe all your cache.

 

• Next from "Advanced" settings, select "Wipe Dalvik Cache" .

• Next reboot your device from main menu.

Part B

• Download MiniTool Partition Wizard From Internet-Download

 

•  Install it in your PC and run it.

• Now unmount your SD card and using any card reader connect it to your PC.
  You can view your SD card from Minitool partition ( try to reload if not present)

 

• Next Right Click on your SD card and select "Delete" from the menu. Keep in mind that this will delete all your Data present on your SD card. We have already warned you to backup important information before doing these steps.

• Now right click on SD card and select "Create" .

 

• Next from the Create New Partition Box, set File System : "FAT32". Here you must allocate the size you wish to utilize as internal memory . Then press "OK". ( leave some space for second partition 512+MB to your wish)

 

• Now, repeat the above process again, but this time choose Create As: "Primary" and then change file system to ext2. ( you can also try ext3/ext4) But ext2 is much stable. This new partition will be the space utilized for storing your downloaded apps. Press OK to continue.

PartC

• After partitioning SD, insert it into LG E400. 

 

• Download Link2SD from playstore and install it on your device.

 

• Next you have to run Link2SD. You will be greeted with a box in which you have to select the format for your second partition. Choose " ext2" and press OK.

 

• It will immediately give a message to restart your phone. Press OK to Restart.

 

• Now select "settings" at the bottom of link2sd. In the settings tab, tick-"Autolink", Autolink Notifications" and then select install location as "External". After that select Power OFF option

• Reboot Your Phone when this process completes. Its done. Now use Multi Select and select all the apps to transfer. You can Select the Apps one by one also.Once you have selected all the required apps press "Actions" button. It Will Give You a new window. Select " Create Link".In Create link window tick all the options and press OK.

 

Your Apps are now moved to SD card.

 

Please comment about any compatibility issues as i had custom kernels on my LG L3 and CM9.

Read full post »

Increase Internal Memory On HTC Explorer A310E Pico [ Link2SD ]

How To Increase Your HTC Pico's Internal Memory Using Link2SD

HTC explorer is super star in the android budget range. Loved equally by users and developers. I am not lying , see for yourself- almost all Cyanogen-mods ,scripts, kernels and lots more support Pico. Isn't it proof for its unmatched popularity.

Even with all these features, the greatest drawback is its lack in internal memory. Almost every user have complained about the dreaded low internal memory issue. Hopefully by the help of some awesome developers we managed to get a solution.

 A simple method to increase your pico's internal memory is explained here.  We use link2sd  ( an android app available for free in playstore) to do the process.

What is Link2SD?

 Link2SD uses the second partition of your SD card to use it as an additional segment of internal memory.

Warning:

• Phone Must Be Rooted . Check:- How To Root HTC Explorer Pico
• Remove App2SD if you have it installed
• Move Apps From SD To internal to link afterwards
• Install Link2SD, no need to run it.
• No Need to format your SD card, just have atleast 1 GB free space. 
• Stock ROM Supports FAT32 as primary. Those with kernal update having ext2,ext3 .. can use it also.

 

Let's Begin:

• Download MiniTool Partition Wizard From Internet.

•  Run Minitool Partition Wizard

•  Plug in your SD card using Card Reader ( USB Mounting is not trustworthy). You can view your SD card from Minitool partition ( try to reload if not present)

• Next right click on your SD card. From the pop up menu select " Move/Resize". It will bring you to a new section.

• Now move the memory slider to get min 512MB to 1024MB on " Unallocated Space", as shown in figure. I have created 1026.66 MB unallocated space. If you have a bigger SD card of 4-8-16-32 GB sizes, better go for 1-4 GB space. i was using a class 4 memory card ( 2GB ) for demonstration. Finally press OK

• Now you have to create a new partition on your unallocated space. For that right click on the new space and select" Create". (Right Click>>Create). It will show a pop-up message, just ignore it and press "Yes".  ( It just shows that after you partition on the primary can be seen on Windows. You can view it on MiniTool)

• This will lead you to new window , where you have to partition your newly created space. Select a name for your drive, Choose "Create As"- Primary, then select "File System"- FAT32. Leave "Cluster Size"- Default.  Finally Press OK.

• Then press " Apply " on Top Left Corner. It will give a warning, press OK and continue.

• It will take Some Time to create and resize partition. Wait till it finishes.

• You have successfully created the secondary partition for Link2SD. Reboot your device and follow the next processes on HTC Explorer.

Now Lets Head over to Link2SD

 

• Open Link2SD on your a310e, you will be welcomed with a screen like this. Now Select" FAT32 "

• Next you will encounter a SuperUser Request. Press Allow button on the screen.

• Now you will get a message showing that mount script have been successfully created on your SD card. You need to restart your device. Press OK at the menu.

 

• Now you will recieve the old Power options. Choose Restart. Once restarted open Link2SD and click the Menu button and go to "Storage Info". You can see your Internal memory, and the two SD partitions.

•  Now use Multi Select and select all the app to transfer. You can Select the Apps one by one also.

• Once you have selected all the required apps press "Actions" button. It Will Give You a new window with the following options as in figure. Select " Create Link"

•  Next you will recieve a " Create Link? " Window. Tick all the three options and press OK.

• Once done you can see the selected apps have been linked to your SD card ( see an orange colored text on top of the app). Next Reboot Your Phone.

• After Rebooting you have to configure your Link2SD settings. Go to Settings by pressing the menu button and configure how you would like Link2SD to work. 

There You go! You have successfully installed and configured Link2SD to increase  your internal memory. ( Enable Auto link).

Feel Free To Comment.

Read full post »