UnBrick LG Optimus L3 E400-Stock Firmware Using KDZ Updater

How to Unbrick Your LG Optimus L3 E400 -Stock Firmware

You might have bricked your LG L3 during Cyanogen or other ROM installations or during Rooting process . Here is the method to Unbrick your precious LG L3 and bring it to stock. 

Note: This method can also be used by non-bricked people who wishes to to return to stock firmware. For them, just enable USB debugging on your device, Turn it off afterwards and continue with the steps as mentioned.

Requirements:

• Download and install LG PC Suite & USB Driver--Link
• Download Stock Firmware according to your country --Link ( if you didnt get the file, please refresh again and again. I had to do it for about 7 or 8 times )
• Download KDZ updater--Link
• Install msxml file found in the KDZ updater folder. The Restart Your PC. ( This will solve the wparam 100 and lparam 6 issue)

  

 

Let's Begin:

• Get your device into emergency mode --->remove the battery and put is back again and then press vol UP + vol DOWN + power button at once.Then wait for a vibration. Now you will see a emergency mode written on yellow background.

 

• Connect your LG L3 to your PC using USB cable.

 

• Next open KDZ updater (Run as Administrator only) and select >>  Type: 3GQCT -- PhoneMode:DIAG 

 

• Select the .kdz firmware file that you have downloaded in the KDZ file section.

 

• We are ready to start the process. Click on the "Launch software update" , it will take some time to finish. If everything goes okay, then you will see a "Finished" message in log. Now your phone has been switched off from Emergency mode.

 

• Next ,turn it on. This will also take some time. Don't worry, its normal the first time.    

You have successfully completed unbricking process.!

feel free to comment.